Are you looking for a easy efficient gold recovery process?
Let me inform you concerning mineral processing equipment that is being used successfully all round the planet, by large scale mining operations throughout to artisanal miners.
It is a substitute for using cyanide.
One of the most efficient and simple technology does not call for the use of harmful chemicals.
Sure, with a cyanide solution for gold leaching is prevalent.
BUT, as Wired magazine from the UK points out…
The waste product from cyanidation is a disgusting and poisonous gloop that could seep into rivers or poison groundwater, killing wildlife and producing landscape sterile. Huge pits of ore can be exposed to cyanide leaching in mines, with the runoff a significant environmental hazard which requires a substantial cost to render secure.
Instead of that, why not use gravity?
GRAVITY SEPARATION IS COST-EFFECTIVE
Gravity separation of fine gold has been the working principle in several cost-effective mineral processing plants, all around the world.
That is in both small-scale and large-scale mineral extraction operations.
By way of example, a small gold shaking table uses a low-capacity vibrating table for gold extraction.
NOT JUST GOLD
Of course, it’s not just for gold. Mineral extraction employing a concentrating table works for regaining other precious metals and minerals also, including all significant minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.
The Wave Table is ideal for cleaning up sluice box separating and concentrates gold from black sands, also. The Wave Table is ideal for cleaning up concentrates from Knelson, Falcon, Knudsen, STLBs and other centrifugal concentrators. (For large throughputs and higher capacity mining/processing operations, especially for gold, we will be able to help you with the most cost effective Centrifugal Concentrators.)
Larger mines are utilizing Wave Tables to carry out final gold clean-ups and also the’finishing’ of gold concentrates. This procedure removes the need to utilize cyanide or mercury.
Gold wave tables are lots better for the environment, as well as for workplace security!
AFTER THE CENTRIFUGAL CONCENTRATION
If you wish to efficiently recover fine gold out of gold bearing ore, you need a Centrifugal Concentrator. For instance, a 1-3 TPH unit will take care of both alluvial and hard rock material.
In a huge mineral processing plant, you may use a Centrifugal Concentrator (known in some states as an STLB) to execute the primary concentration. That’s, to regain all of the gold and heavy minerals out of the ore feed.
THE SECONDARY CONCENTRATION
But to really get’clean gold’, you need to then conduct the cons through the following procedure (a secondary concentrator), like running the drawbacks over a Wave Table. As a result, an updated percentage is regained that is a lot smaller in bulk, so it is a lot easier to take care of.
When targets are cleaned upon a Wave Table, you produce clean gold prepared to be smelted and become a gold bar available.
All this without using cyanide or mercury.
Another cyanide-free option is chemical leaching.
Gold can be extracted from run of mine ore in addition to from concentrates using the Chemical Leaching System, and it can be a cost effective non-cyanide gold leaching system which GoldWaveTables.com can help you with.
CLS may be used for almost any metallic but is especially used for the recovery of gold, silver and platinum group metals.
3 MODELS OF THE GOLD WAVE TABLE
This unbelievable gold separation device comes in 3 versions covering all scales of operation. Despite the name, a gold wave table works to extract ANY heavy nutrient, in which there’s a specific gravity (density) differential between the valuable heavy mineral constituent as well as its gangue or host material. It also cleans gold and grit from the stripped carbon used in CIP/CIL software.
The Greatest DEVICE
To quote Ian, a 30-year experienced in the mining and minerals industry,”I have personally had success with the Wave Table regaining very fine heavy minerals like gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite etc.. As it’s so effective at recovering very nice particle sizes, it has proved excellent as a scavenger on tailings. The Wave Table will easily recover 5 micron gold from tailings. In mineral processing, it’s frequently what you lose to tailings that’s as important as what you recover. I’ve found that the Wave Table is the greatest device to check tailings for lost heavy minerals, including gold. A simple test on your tailings will only take a couple of minutes. You may observe any heavy mineral lost in the tailings in a short time span. This type of test will obviate the need for prolonged firing assay turn around times.”
The most significant model is the M10 that does around 8TPH (tonnes per hour) and the M8 version does around 1TPH. The smallest version, the M5, is suitable for small cleanups of 20 kgs per hour and may be utilised as a laboratory unit.
– Gold wave tables are a lot better for your environment
– Better for office safety too
– Low water use
– Efficient and cost-effective.
Whenever you are on the lookout for gold recovery plant for sale, check out GoldWaveTables.com
The Wave Table may be utilized at the smallest to the biggest gold mine. They can be used for full scale manufacturing functions, or just as a cleanup or concentration device from the gold room.
The Wave Table has become increasingly used to recover gold from evaluation samples of a few kgs in size and upward. This form of bulk testing is quick and the quantitative outcomes imply that you’re not just relying on flame assays or AAS, especially in observable free gold deposits, even when gold is ultra fine (5 to 20 microns).
Visit https://GoldWaveTables.com to learn more today.
We can also assist you with a Chemical Leaching System, including supplies and training. Contact us for the “CLS Manual on Non-Cyanide Leaching”.
Also learn more about Mineral Processing Plant here.